• No compression tool required
• Designed for indoor applications
• Connector locks in place on cable jacket for a permanent connection
• Faster and easier to use than traditional twist on connectors
• Patented 360˚ grip on cable prevents cable and dielectric deformation that result in signal loss
• 3GHZ, 75Ω rated for use in all video based applications such as cable and satellite television
• >50lbs cable retention
• Fits cables with .254” - .278” jacket diameter
• Fits cables with .175” - .183” dielectric diameter
• Only requires industry standard 1/4” x 1/4” cable preparation
• Recommended IDEAL cable prep tool: 45-605

Designed to save the installer time, labor, and cost when installing indoor RG-6 F-Type connections, no compression tool is required to terminate these connectors.

The new TLC (Tool-Less Compression) RG-6 F compression connector is our simplest, fastest, and lowest total cost solution for installing compression connectors. Designed to save the installer time, labor, and cost when installing indoor RG-6 F-Type connections, no compression tool is required to terminate these connectors.

The TLC connector is an indoor, cable specific F connector. It uses the industry standard 1/4” x 1/4” cable preparation. By eliminating the need to have a compression tool terminate the connector to the cable, the installer can work faster, keep track of fewer tools, and not worry about tool and connector compatibility issues.

The TLC series connectors feature a sliding, locking post design to capture and secure the cable inside of the connector. After the cable is inserted, tightening the connector to the device completes assembly process, creating a 360° compression point and a permanent connection. Unlike twist-on connectors that deform the cable jacket, the TLC goes on easy, does not require twisting, and has the benefits of a traditional full radial compression connector that does not deform the cable from its designed round shape.

IDEAL F/BNC insertion tools (35-046, 35-042) can be used (but are not required) when installing the TLC cable assembly to ensure connectors are properly torqued and fully seated to the female barrel. These connectors are designed for indoor applications from 5MHz to 3GHz including CATV and satellite. Connectors are not reusable once installed on a coax. They create a secure, permanent connection and must be cut off to be removed.