TestEquity
Huntron
Huntron

Huntron 99-0401 Tracker 2800, 2 CH, 6 Voltages, 9 Resistances, 6 Frequencies, 2800 Series

Our Part #42693.1

Mfr Part #99-0401

Huntron 99-0401
Huntron
Huntron

Huntron 99-0401 Tracker 2800, 2 CH, 6 Voltages, 9 Resistances, 6 Frequencies, 2800 Series

Our Part #42693.1

Condition:New

Mfr Part #99-0401

$5,595.00EACH

99-0401 Tracker 2800

Features:

  • 6 voltages: 200mV, 3V, 5V, 10V, 15V, 20V
  • 9 resistances: 10, 50, 100, & 500 Ohms / 1, 5, 10, 50 & 100 kilohms
  • 6 frequencies: 20Hz, 50Hz, 60Hz, 200Hz, 500Hz & 2kHz
  • Manual or use Auto Scan; Optional Software control
  • Banana jacks for A/B Test channels & Common
  • Variable voltage from 0 to 10VDC; 200mA max.

Includes: CD manual, power cord, test leads, MP20 probe set, and mini hook test lead.

Highlights:

  • Optional Software Control using Huntron Workstation
  • Enhanced Range Selections
  • Full Screen Signature Zoom
  • Color Touch Screen controls
  • Huntron SigAssist built-in
  • Built-in DC Voltage Source for testing gated devices (i.e. SCRs, relays, etc.)

The 2800 Series of Huntron Tracker are designed to complement conventional test instruments in the debug and troubleshooting process. Using the proven power-off test method known as Analog Signature Analysis it eliminates the risk of further circuit damage, which often occurs when power is applied. The Huntron Trackers are suited for todays varied signal circuit cards where Analog and Digital are mixed together.

The Tracker 2800's features variable range parameters resulting in over 100 combinations of voltage, source resistance and frequency. The 2800 series is a great off-line support tool for the automated Huntron Access Prober diagnostic systems.

The Tracker works by applying a current-limited AC signal across two points of a component. The current flow causes a vertical signature deflection, while the applied voltage causes a horizontal deflection. Together they form a unique V/I signature that represents the overall health of the device under test. Analyzing the signature can quickly determine whether the component is good, bad, or marginal.

NOTE: Tracker 2800 cannot be used with an Access Prober. It can be used with the Huntron Workstation software but otherwise is a stand alone instrument.


BrandHuntron
Series2800 Series
$5,595.00EACH