TestEquity
Tasco

Tasco BLM2015 Buried Line Locator, 6V, 33.3 kHz, 13mA, 120 deg F, LCD/LED, 15ft Depth

Our Part #10288243

Mfr Part #BLM2015

Tasco BLM2015
Tasco

Tasco BLM2015 Buried Line Locator, 6V, 33.3 kHz, 13mA, 120 deg F, LCD/LED, 15ft Depth

Our Part #10288243

Condition:NEW

Mfr Part #BLM2015

$1,759.00EACH

  • Traces live, open or shorted lines and conduit underground
  • Performs the functions of more expensive locators at a lower cost
  • Easy to understand with a shorter learning curve than traditional locators
  • Measures depth to 15 feet
  • LCD and LED signal strength for utmost accuracy
  • Passive mode for tracing cable TB and telephone lines
  • Auto gain circuitry eliminates need for manual signal strength adjustments
  • Current Draw: 13 mA open line, 150 mA live or shorted line
  • 2 year warranty

The Buried Line Locator System

The Tasco BLM2015 Buried Line Locator uses new technology that performs the functions of more expensive locators at a lower cost. The design allows the unit to be far lighter, yet still have better accuracy and definition. The transmitter uses a lower current output than competing units and a frequency that is more finely tuned. This combination is less likely to disturb lines that have equipment connected and allows both transmitter and receiver to operate on standard "AA" size batteries. Microprocessors have been used in this product to increase simplicity of use. The product is easy to understand with a shorter learning curve than traditional locators.

How it Works

The receiver display indicates signal strength, depth, low battery and passive mode settings. If the signal is lost, the auto gain may be reset at any time with the "signal reset" button. This will immediately allow you to re-locate the line. The passive mode setting will locate electrical, CATV and telephone lines without transmitter signal. If the receiver is left on when not in use, a warning will sound. the audible signal is used for quickly tracing lines. The LED and LCD displays are used to pinpoint exact line location and depth measurement.

The transmitter induces a unique signal onto the line or conduit being traced. It can be connected to the line by clip leads, clamp or inductive coupling. Inductive coupling sends the signal to the line so there is no physical connection to the conductor. The transmitter indicates low battery, power and live line connection. The product is rated for electrical use and be directly connected to a maximum for 600VAC.

What's In The Box

  • Receiver
  • Transmitter
  • Carry case
  • Batteries
  • Clamp
  • Ground stake
  • Instruction manual

Brand: Tasco
Voltage: 600 V V
Current: 13 mA mA
Frequency: 33.3 kHz kHz
Operating Temperature: 0 - 120°F
Power: 6 VDC
Range: 15 ft.
Size: 4.1 x 8.5 x 38"
$1,759.00EACH