Rohde & Schwarz RT-ZP03S 10:1 300 MHz Passive Oscilloscope Probe

• Bandwidth: 300 MHz
• Attenuation: 10:1
• Dynamic range: 400 V
• DC input resistance, Differential 10 MOhm
• DC input capacitance, Differential 12 pF
• Cable length 1.2m

Rohde & Schwarz RT-ZP03S is a 300 MHz Passive Voltage Probe. It has an attenuation of 10:1 and input capacitance of 12 pF. The Rohde & Schwarz passive probes are the all-rounders in the world of probes. They are low-cost, general purpose probing solutions for a broad range of applications. The BNC connector allows them to be used on almost any oscilloscope. Passive probes with readout pin enable. Rohde & Schwarz oscilloscopes to automatically detect the attenuation factor. A spring-loaded tip ensures good contact with the DUT.

*NOTE: The probe is not rated for any measurement category. Do not use the probes in circuits with measurement category II, III or IV

• RT-ZP03S Probe
• Adjustment Tool
• Coding clips (set) 2 × 4 colors
• 2x Signal pin
• Sprung hook 5 mm
• Ground spring
• Ground lead 14 cm
• Insulating cap
• Protective cap
• Operating manual