Water-based acrylic static dissipative coating. At least a couple of coats of this surface treatment solution can give you a long-lasting solution to make the surface static-free. Uses pigments that are free of any lead.

It uses iron oxide, titanium dioxide, and extenders to ensure that the coating leaves a nice color on the surface without compromising on safety.

Easy to apply; you can use a roller, a brush, or even a spray machine to evenly apply its coats on a surface. The solution becomes dry to the touch one hour after application, but it is better to wait for three to four hours after the first coat to apply the second one. A minimum of two coats is necessary to get the best out of the product.

Features:

• Effective in creating a static-free work environment
• Easy-to-apply coating
• Can be used on a wide variety of surfaces, including walls, floors, ceilings, printed circuit boards, containers, plastic surfaces, and more.
• Coating type: Water-based acrylic static dissipative coating
• Conductivity: Static dissipative coating for the electronics industry requirements. Meets and exceedsANSI/ESD S20.20 – 2014 for static decay.
• Vehicle type: Acrylic resin, waterborne
• Pigment type: Lead-free, iron oxide, titanium dioxide, and extenders
• Non-combustible
• Dry film thickness: 1.5 mils per coat
• Average drying time: At 75 degrees Fahrenheit, 50% R.H.: 1 hr to the touch with first coat. Re-coat after 3-4 hours.
• pH Level: 8.3