Keysight 35670A/1C2/1D0/1D1/1D2/1D3/1D4/AY6/UFC/UFF Signal Analyzer, 4CH, 25.6kHz, 35670A Series

Keysight 35670A/1C2/1D0/1D1/1D2/1D3/1D4/AY6/UFC/UFF Dynamic Signal Analyzer, 4 Channel, 25.6kHz, Order Tracking and Real-Time Octave

The Keysight 35670A configured with options 1C2, 1D0, 1D1, 1D2, 1D3, 1D4, AY6, UFC, and UFF is a four-channel FFT-based dynamic signal analyzer for vibration analysis, acoustics, rotating machinery diagnostics, control-system characterization, and spectrum/network analysis. The AY6 option provides four input channels with up to 25.6 kHz maximum frequency in four-channel operation.

Configurations Include

• 1C2 - Program with Instrument BASIC
  Adds Instrument BASIC programming capability for automation, custom interfaces, and system integration
• 1D0 - Computed Order analysis intrument mode
  Supports rotating machinery analysis using computed order tracking.
• 1D1 - Real-time Octave analysis instrumnet mode
  Provides real-time octave and fractional-octave measurements for acoustics and noise analysis.
• 1D2 - Swept Sine instrument mode
  Provides real-time octave and fractional-octave measurements for acoustics and noise analysis.
• 1D3 - Curve fit/synthesis
  Provides modal analysis tools including curve fitting and synthesis.
• 1D4 - Arbitrary waveform source
  Adds arbitrary source generation for advanced excitation signals.
• AY6 - Adds two channels (four total)
  Expands the analyzer to four input channels.
• UFC - Adds 8 MB RAM upgrade
  Adds expanded memory capacity.
• UFF - Adds1 MB NVRAM
  Provides additional non-volatile memory for instrument storage.

Key Specs

• Frequency Range: 122 µHz to 102.4 kHz (1 channel), 51.2 kHz (2 channel), or 25.6 kHz (4 channel with AY6)
• Dynamic Range: 90 dB
• Accuracy: +/- 0.15 dB
• Real-time Bandwidth: 25.6 kHz / 1 channel
• Resolution: 100, 200, 400, 800 lines
• Time Capture: > 6 Msamples
• Source Types: Random, burst random, periodic chirp, burst chirp, pink noise, sine, swept-sine, arbitrary