• Ideal for all rework, solder, de-solder and reflow applications
• Non-corrosive, non-conductive, no-clean
• Tack flux will not run all over PCB when applied
• Has a pleasant odor
• Excellent wetting
• Easily cleaned with isopropyl alcohol (IPA)
• Attachment of BGA spheres
• Soldering flip chip components
• Long stencil life
• Wide process window Clear residue Can be used with Leaded and Lead-Free applications RoHS 3 and REACH compliant

Tack Flux no-clean water-washable 10cc syringe w/plunger & tip. Low viscosity no-clean water-washable synthetic paste flux. Has a pleasant odor.

Shelf Life

• Refrigerated >4 months, unrefrigerated >24 months

Stencil Life

• >8 hours @ 20-50% RH 22-28deg C (72-82deg F)
• >4 hours @ 50-70% RH 22-28deg C (72-82deg F)

Stencil Cleaning

• Automated stencil cleaning systems for both stencil and misprinted boards. Manual cleaning using isopropyl alcohol (IPA).

Storage and Handling

• Store refrigerated or at room temperature 3-25deg C (37-77deg F). Do not freeze. Allow 4 hours for flux to reach an operating temperature of 20-25deg C (68-77deg F) before use.

Transportation

• This product has no shipping restrictions. Shipping below 0deg C (32deg F) or above 25deg C (77deg F) for normal transit times by ground or air will not impact this product's stated shelf life.