Keysight; Fieldfox N991xB and N993xB

NEW FieldFox B Series, the Industry's Most Precise
Handheld RF & Microwave Analyzers, to 26.5 GHz

FieldFox, the industry's most versatile portable analyzer, is launching a new line of future-ready analyzers to address the ever-increasing demands of 5G, satellite communications, signal monitoring and electronic warfare applications. This new generation FieldFox handheld microwave analyzers offers six "Combination" models (N991xB) and six "Signal Analyzer" models (N993xB) covering frequency ranges between 4 and 26.5 GHz. All existing FieldFox A Series measurement capabilities (except QuickCal) are supported on the new FieldFox B Series. 100 MHz (Option B10) and 40 MHz (Option B04) analysis bandwidth options will be available on the B models, with 10 MHz as the standard option.

  • 100 MHz of analysis bandwidth, I/Q capture and real-time bandwidth, wideband IF output
  • 10 dB improved DANL over previous generation FieldFox, up to 15 dB better in some bands
  • Greater than 115 dB VNA system dynamic range
  • New high output power source >8 dBm in some bands
  • 10 dB improved phase noise over previous generation FieldFox
  • 5G NR and LTE-A demodulation with 89600 VSA software
  • Over-the-Air (OTA) measurements for 5G TF and LTE FDD
  • Supports record and playback of I/Q capture that can be analyzed with custom I/Q open architecture solutions
  • Multi-GNSS (Global Navigation Satellite System) support for geolocation and time stamping: GPS+SBAS, GLONASS, BDS, Galileo
  • New high capacity battery providing over 5 hours of battery life

Industry's most precise handheld analyzer with 100 MHz RTSA

  • Easily capture intermittent beam sweeping technologies used in 5G and radar systems
  • Detect small signals once masked by stronger signals
  • Capture signals as narrow as 5.52 µs with 100% POI and full amplitude accuracy
  • Accelerate communication system development by quickly switching to over-the-air (OTA) measurements

NEW FieldFox B Series RF and Microwave Combination Analyzers

Model N9913B N9914B N9915B N9916B N9917B N9918B
Frequency 4 GHz 6.5 GHz 9 GHz 14 GHz 18 GHz 26.5 GHz
 

 

  • Base model includes cable and antenna analyzer
  • Expand capabilities with optional vector network analyzer (VNA), spectrum analyzer, real-time spectrum analyzer, and more
  • Capture intermittent signals with 100 MHz gap-free real-time bandwidth
  • Simultaneously measure all four S-parameters with 115 dB system dynamic range
  • Make accurate spectrum analyzer measurements (±0.3 dB) without warm-up
  • Validate network performance with over-the-air (OTA) measurements for 5GTF and LTE
  • GPS/GNSS receiver for geolocation and time stamp precision
  • Lightest all-in-one analyzer at only 7.35 lb. (3.34 kg)

NEW FieldFox B Series Signal Analyzers

Model N9933B N9934B N9935B N9936B N9937B N9938B
Frequency 4 GHz 6.5 GHz 9 GHz 14 GHz 18 GHz 26.5 GHz

 

  • Expand capabilities with optional real-time spectrum analyzer, tracking generator, USB power sensor, and more
  • Make accurate spectrum analyzer measurements (±0.3 dB) without warm-up
  • Capture intermittent signals with 100 MHz gap-free real-time bandwidth
  • Portable solution for radar pulse profile characterization
  • Validate network performance with over-the-air (OTA) measurements for 5GTF and LTE
  • Ideal wideband I/Q data capture tool for RF signal monitoring and analysis 
  • GPS/GNSS receiver for geolocation and time stamp precision
  • Lightest all-in-one analyzer at only 7.35 lb. (3.34 kg)